 |
| Quantity: | |
|---|---|
1 series
HONESTY-AL
▍ Product Advantage
1. Small Density: Pure aluminum density 2.7KG/M3. That's about 35% of iron.
2. Strengthenability: Pure aluminum through cold processing can increase its strength by more than 1 times, and by adding magnesium, zinc, copper, manganese, silicon, lithium, scandium and other elements of alloy, can be further strengthened by heat treatment, its strength can be compared with alloy steel.
3. Easy Processing: Aluminum can be cast by any casting method. Good plasticity, most machine tools can reach the maximum speed for turning, milling, boring, planing and other mechanical processing.
4. Corrosion Resistance: Aluminum and its alloy surface, easy to form a layer of dense and solid AL2O3 protective film, this layer of protective film only under the stimulation of halogen ions or alkali ions will create damage. Therefore, aluminum has a good resistance to atmospheric (including industrial atmosphere, and Marine atmosphere) corrosion and water corrosion ability.
5. Good Electrical and Thermal Conductivity: Aluminum's electrical and thermal conductivity is second only to silver, copper and gold.
 |  |
▍ Technical Parameters
Item | Aluminum Sheet / Plate |
Standard | GB/T3190-2008, GB/T3880-2006, ASTM B209, JIS H4000-2006 etc |
Grade | 1050 1060 1100 etc. |
Temper | O-H112 |
Tolerance | ±1% |
Surface Treatment | Mirrored, Brushed |
Processing Service | Cutting, Decoil etc |
Edge | Mill edge, Cut edge |
Thickness | 0.15-6.0mm |
Width | 10-2200mm |
▍ Chemical Component
Grade | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Al |
1050 | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | - | 99.50 |
1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | - | 0.05 | 0.03 | 99.60 | |
1070 | 0.20 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | 0.04 | 0.03 | - | 99.70 |
1100 | - | - | 0.05~0.20 | 0.05 | - | - | - | 0.10 | - | - | 99.00 |
▍ Product Uses
Chemical equipment, inland vessel equipment, various containers (wine cans, pressure tanks, tea stoves, etc.), conductive materials, chemical equipment, instruments and meters, signs (equipment signs, highway signs, motor vehicle license plates, etc.), building decoration materials, hardware cooking utensils, machine parts with little force.
▍ Product Advantage
1. Small Density: Pure aluminum density 2.7KG/M3. That's about 35% of iron.
2. Strengthenability: Pure aluminum through cold processing can increase its strength by more than 1 times, and by adding magnesium, zinc, copper, manganese, silicon, lithium, scandium and other elements of alloy, can be further strengthened by heat treatment, its strength can be compared with alloy steel.
3. Easy Processing: Aluminum can be cast by any casting method. Good plasticity, most machine tools can reach the maximum speed for turning, milling, boring, planing and other mechanical processing.
4. Corrosion Resistance: Aluminum and its alloy surface, easy to form a layer of dense and solid AL2O3 protective film, this layer of protective film only under the stimulation of halogen ions or alkali ions will create damage. Therefore, aluminum has a good resistance to atmospheric (including industrial atmosphere, and Marine atmosphere) corrosion and water corrosion ability.
5. Good Electrical and Thermal Conductivity: Aluminum's electrical and thermal conductivity is second only to silver, copper and gold.
| |
▍ Technical Parameters
Item | Aluminum Sheet / Plate |
Standard | GB/T3190-2008, GB/T3880-2006, ASTM B209, JIS H4000-2006 etc |
Grade | 1050 1060 1100 etc. |
Temper | O-H112 |
Tolerance | ±1% |
Surface Treatment | Mirrored, Brushed |
Processing Service | Cutting, Decoil etc |
Edge | Mill edge, Cut edge |
Thickness | 0.15-6.0mm |
Width | 10-2200mm |
▍ Chemical Component
Grade | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Al |
1050 | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | - | 99.50 |
1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | - | 0.05 | 0.03 | 99.60 | |
1070 | 0.20 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | 0.04 | 0.03 | - | 99.70 |
1100 | - | - | 0.05~0.20 | 0.05 | - | - | - | 0.10 | - | - | 99.00 |
▍ Product Uses
Chemical equipment, inland vessel equipment, various containers (wine cans, pressure tanks, tea stoves, etc.), conductive materials, chemical equipment, instruments and meters, signs (equipment signs, highway signs, motor vehicle license plates, etc.), building decoration materials, hardware cooking utensils, machine parts with little force.
