 |
| Quantity: | |
|---|---|
7075
HONESTY-AL
▍ Product Advantage
1. Aluminum alloy with zinc as the main alloying element
2. Can be strengthened by heat treatment
3. High hardness, high strength, good wear resistance, belongs to super hard aluminum alloy. 7075 aluminum plate is stress-relieved, after processing will not deformation, warping. All super thick 7075 aluminum plates are ultrasonic detected, which can ensure that there is no sand hole and impurities.
 |  |  |
▍ Technical Parameters
Item | Aluminum Plate |
Standard | GB/T3190-2008, GB/T3880-2006, ASTM B209, JIS H4000-2006 etc |
Grade | 7050, 7075 etc. |
Temper | T3, T4, T6, T651 etc. |
Tolerance | ±1% |
Surface Treatment | Mirrored, Brushed, Anodizing etc. |
Processing Service | Cutting, Decoil etc |
Edge | Mill ge, Cut edge |
Thickness | 10-200mm |
Width | 10-2200mm |
▍ Chemical Performance
| Grade | Temper | Thickness (mm) | Tensile Strength (R/MPa) | Yield Strength (Rp2.0/MPa) | Elongation | |
| A50mm | A | |||||
| 7075 | O | ＞0.40~0.80 | ≤275 | ≤145 | 10 | - |
| ＞0.80~1.50 | - | |||||
| ＞1.50~3.00 | - | |||||
| ＞3.00~6.00 | - | |||||
| ＞6.00~12.50 | - | |||||
| ＞12.50~75.00 | - | - | 9 | |||
| T6 | ＞0.40~0.80 | 525 | 460 | 6 | ||
| ＞0.80~1.50 | 540 | 460 | 6 | |||
| ＞1.50~3.00 | 540 | 470 | 7 | |||
| ＞3.00~6.00 | 545 | 475 | 8 | |||
| ＞6.00~12.50 | 540 | 460 | 8 | |||
| ＞12.50~25.00 | 540 | 470 | - | 6 | ||
| ＞25.00~50.00 | 530 | 460 | - | 5 | ||
| ＞50.00~60.00 | 525 | 440 | - | 4 | ||
| T76 | ＞1.50~3.00 | 500 | 425 | 7 | - | |
| ＞3.00~6.00 | 500 | 425 | 8 | - | ||
| ＞6.00~12.50 | 490 | 415 | 7 | - | ||
| F | ＞6.00~50.00 | - | ||||
▍ Product Uses
Widely used in many parts on aircraft (mainly external parts), other high hardness components with high strength and strong corrosion resistance; a variety of precision molds are required.
7050: Foaming(bottle) molds, ultrasonic plastic welding molds, golf balls, shoe molds, paper molds, foam molds, lost wax molds, templates, fixtures, machinery and equipment etc.
7075: Aerospace industry, military industry, electronics etc.
▍ Product Advantage
1. Aluminum alloy with zinc as the main alloying element
2. Can be strengthened by heat treatment
3. High hardness, high strength, good wear resistance, belongs to super hard aluminum alloy. 7075 aluminum plate is stress-relieved, after processing will not deformation, warping. All super thick 7075 aluminum plates are ultrasonic detected, which can ensure that there is no sand hole and impurities.
| | |
▍ Technical Parameters
Item | Aluminum Plate |
Standard | GB/T3190-2008, GB/T3880-2006, ASTM B209, JIS H4000-2006 etc |
Grade | 7050, 7075 etc. |
Temper | T3, T4, T6, T651 etc. |
Tolerance | ±1% |
Surface Treatment | Mirrored, Brushed, Anodizing etc. |
Processing Service | Cutting, Decoil etc |
Edge | Mill ge, Cut edge |
Thickness | 10-200mm |
Width | 10-2200mm |
▍ Chemical Performance
| Grade | Temper | Thickness (mm) | Tensile Strength (R/MPa) | Yield Strength (Rp2.0/MPa) | Elongation | |
| A50mm | A | |||||
| 7075 | O | ＞0.40~0.80 | ≤275 | ≤145 | 10 | - |
| ＞0.80~1.50 | - | |||||
| ＞1.50~3.00 | - | |||||
| ＞3.00~6.00 | - | |||||
| ＞6.00~12.50 | - | |||||
| ＞12.50~75.00 | - | - | 9 | |||
| T6 | ＞0.40~0.80 | 525 | 460 | 6 | ||
| ＞0.80~1.50 | 540 | 460 | 6 | |||
| ＞1.50~3.00 | 540 | 470 | 7 | |||
| ＞3.00~6.00 | 545 | 475 | 8 | |||
| ＞6.00~12.50 | 540 | 460 | 8 | |||
| ＞12.50~25.00 | 540 | 470 | - | 6 | ||
| ＞25.00~50.00 | 530 | 460 | - | 5 | ||
| ＞50.00~60.00 | 525 | 440 | - | 4 | ||
| T76 | ＞1.50~3.00 | 500 | 425 | 7 | - | |
| ＞3.00~6.00 | 500 | 425 | 8 | - | ||
| ＞6.00~12.50 | 490 | 415 | 7 | - | ||
| F | ＞6.00~50.00 | - | ||||
▍ Product Uses
Widely used in many parts on aircraft (mainly external parts), other high hardness components with high strength and strong corrosion resistance; a variety of precision molds are required.
7050: Foaming(bottle) molds, ultrasonic plastic welding molds, golf balls, shoe molds, paper molds, foam molds, lost wax molds, templates, fixtures, machinery and equipment etc.
7075: Aerospace industry, military industry, electronics etc.
