 |
| Quantity: | |
|---|---|
Product Features
1.1050 aluminum alloy belongs to the pure aluminum series, which has high ductility and reflectivity.
2. 1050 aluminum alloy is a non-heat-treatable alloy that is strengthened by cold working and has excellent cold workability and weldability.
3. The mechanical strength of 1050 aluminum alloy is low, which is very suitable for chemical and electrolytic brightening, but not suitable for casting.
4. The most important point is that the surface of 1050 aluminum alloy can be anodized. And the medium strength and excellent processing technology make 1050 aluminum alloy have a wider range of applications.
Technical Parameters
Item | Aluminum Coil |
Standard | GB/T3190-2008,GB/T3880-2006,ASTM B209,JIS H4000-2006 etc |
Grade | 1050 |
Temper | F, O, H12, H14, H16, H18 , H22, H24, H26, H28 |
Surface Treatment | Mill finish, Mirrored, Brushed, Sandblasted, Embossed, Color Coated etc. |
Technology | Hot rolled ( DC ), cold rolling ( CC ), cast |
Thickness | 0.15-2.0mm |
Width | 10-2000mm |
Tolerance | ±1% |
Application | Printing plate making, image plate making, road signs, thermal insulation materials |
Product Uses
1050 aluminum alloy is commonly used in some places that require high corrosion resistance and formability but not high strength.1050 aluminum alloy is used for lithium battery soft connection, pole material, explosion-proof valve, PS board base, heat sink, signage, lamp, reflector, aluminum composite panel material etc.
Chemical Performance
Grade | Temper | Thickness (mm) | Tensile Strength (Rm/Mpa) | Yield Strength (Rp0.2/Mpa) | Elongation(%) | |
A50mm | A | |||||
1050 | O | >0.20~0.50 | 60-100 | - | 15 | - |
>0.50~0.80 | 20 | - | ||||
>0.80~1.50 | 20 | 25 | - | |||
>1.50~6.00 | 30 | - | ||||
>6.00~50.00 | 28 | 28 | ||||
1050 | H12 | >0.20~0.30 | 80-120 | - | 2 | - |
>0.30~0.50 | 3 | - | ||||
>0.50~0.80 | 4 | - | ||||
>0.80~1.50 | 65 | 6 | - | |||
>1.50~3.00 | 8 | - | ||||
>3.00~6.00 | 9 | - | ||||
1050 | H22 | >0.20~0.30 | 80 | - | 2 | - |
>0.30~0.50 | 3 | - | ||||
>0.50~0.80 | 4 | - | ||||
>0.80~1.50 | 65 | 6 | - | |||
>1.50~3.00 | 8 | - | ||||
>3.00~6.00 | 9 | - | ||||
1050 | H14 | >0.20~0.30 | 95-130 | - | 1 | - |
>0.30~0.50 | 2 | - | ||||
>0.50~0.80 | 3 | - | ||||
>0.80~1.50 | 75 | 4 | - | |||
>1.50~3.00 | 5 | - | ||||
>3.00~6.00 | 6 | - | ||||
1050 | H24 | >0.20~0.30 | 95 | - | 1 | - |
>0.30~0.50 | 2 | - | ||||
>0.50~0.80 | 3 | - | ||||
>0.80~1.50 | 75 | 4 | - | |||
>1.50~3.00 | 5 | - | ||||
>3.00~6.00 | 6 | - | ||||
Product Features
1.1050 aluminum alloy belongs to the pure aluminum series, which has high ductility and reflectivity.
2. 1050 aluminum alloy is a non-heat-treatable alloy that is strengthened by cold working and has excellent cold workability and weldability.
3. The mechanical strength of 1050 aluminum alloy is low, which is very suitable for chemical and electrolytic brightening, but not suitable for casting.
4. The most important point is that the surface of 1050 aluminum alloy can be anodized. And the medium strength and excellent processing technology make 1050 aluminum alloy have a wider range of applications.
Technical Parameters
Item | Aluminum Coil |
Standard | GB/T3190-2008,GB/T3880-2006,ASTM B209,JIS H4000-2006 etc |
Grade | 1050 |
Temper | F, O, H12, H14, H16, H18 , H22, H24, H26, H28 |
Surface Treatment | Mill finish, Mirrored, Brushed, Sandblasted, Embossed, Color Coated etc. |
Technology | Hot rolled ( DC ), cold rolling ( CC ), cast |
Thickness | 0.15-2.0mm |
Width | 10-2000mm |
Tolerance | ±1% |
Application | Printing plate making, image plate making, road signs, thermal insulation materials |
Product Uses
1050 aluminum alloy is commonly used in some places that require high corrosion resistance and formability but not high strength.1050 aluminum alloy is used for lithium battery soft connection, pole material, explosion-proof valve, PS board base, heat sink, signage, lamp, reflector, aluminum composite panel material etc.
Chemical Performance
Grade | Temper | Thickness (mm) | Tensile Strength (Rm/Mpa) | Yield Strength (Rp0.2/Mpa) | Elongation(%) | |
A50mm | A | |||||
1050 | O | >0.20~0.50 | 60-100 | - | 15 | - |
>0.50~0.80 | 20 | - | ||||
>0.80~1.50 | 20 | 25 | - | |||
>1.50~6.00 | 30 | - | ||||
>6.00~50.00 | 28 | 28 | ||||
1050 | H12 | >0.20~0.30 | 80-120 | - | 2 | - |
>0.30~0.50 | 3 | - | ||||
>0.50~0.80 | 4 | - | ||||
>0.80~1.50 | 65 | 6 | - | |||
>1.50~3.00 | 8 | - | ||||
>3.00~6.00 | 9 | - | ||||
1050 | H22 | >0.20~0.30 | 80 | - | 2 | - |
>0.30~0.50 | 3 | - | ||||
>0.50~0.80 | 4 | - | ||||
>0.80~1.50 | 65 | 6 | - | |||
>1.50~3.00 | 8 | - | ||||
>3.00~6.00 | 9 | - | ||||
1050 | H14 | >0.20~0.30 | 95-130 | - | 1 | - |
>0.30~0.50 | 2 | - | ||||
>0.50~0.80 | 3 | - | ||||
>0.80~1.50 | 75 | 4 | - | |||
>1.50~3.00 | 5 | - | ||||
>3.00~6.00 | 6 | - | ||||
1050 | H24 | >0.20~0.30 | 95 | - | 1 | - |
>0.30~0.50 | 2 | - | ||||
>0.50~0.80 | 3 | - | ||||
>0.80~1.50 | 75 | 4 | - | |||
>1.50~3.00 | 5 | - | ||||
>3.00~6.00 | 6 | - | ||||
