 |
| Quantity: | |
|---|---|
7075
HONESTY-AL
76061200
▍ Product Features
1. Aluminum alloy with zinc as the main alloying element
2. Can be strengthened by heat treatment
3. High hardness, high strength, good wear resistance, belongs to super hard aluminum alloy.
7075 aluminum plate is stress-relieved, after processing will not deformation, warping. All super thick 7075 aluminum plates are ultrasonic detected, which can ensure that there is no sand hole and impurities
▍ Technical Parameters
| Item | Aluminum Sheet/Plate |
| Standard | GB/T3190-2008,GB/T3880-2006,ASTM B209,JIS H4000-2006 etc |
| Grade | 7075 |
| Temper | T3-T8/T351-T851 |
| Tolerance | ±1% |
| Surface Treatment | Mirrored, Brushed |
| Processing Service | Bending，Punching，Cutting etc |
| Edge | Mill edge, Cut edge |
| Thickness | 0.1-200mm |
| Width | 10-2200mm |
| Customized | Yes |
| Certificate | ISO9001 |
| Package | Standard Seaworthy Wooden Pallet Packing |
| MOQ | 6 Ton |
| Sample | Available |
| Delivery Time | 7-15 Working Days |
▍ Chemical Performance
| Grade | Temper | Thickness (mm) | Tensile Strength (R/MPa) | Yield Strength (Rp2.0/MPa) | Elongation | |
| A50mm | A | |||||
| 7075 | O | ＞0.40~0.80 | ≤275 | ≤145 | 10 | - |
| ＞0.80~1.50 | - | |||||
| ＞1.50~3.00 | - | |||||
| ＞3.00~6.00 | - | |||||
| ＞6.00~12.50 | - | |||||
| ＞12.50~75.00 | - | - | 9 | |||
| T6 | ＞0.40~0.80 | 525 | 460 | 6 | ||
| ＞0.80~1.50 | 540 | 460 | 6 | |||
| ＞1.50~3.00 | 540 | 470 | 7 | |||
| ＞3.00~6.00 | 545 | 475 | 8 | |||
| ＞6.00~12.50 | 540 | 460 | 8 | |||
| ＞12.50~25.00 | 540 | 470 | - | 6 | ||
| ＞25.00~50.00 | 530 | 460 | - | 5 | ||
| ＞50.00~60.00 | 525 | 440 | - | 4 | ||
| T76 | ＞1.50~3.00 | 500 | 425 | 7 | - | |
| ＞3.00~6.00 | 500 | 425 | 8 | - | ||
| ＞6.00~12.50 | 490 | 415 | 7 | - | ||
| F | ＞6.00~50.00 | - | ||||
▍ Product Uses
Widely used in many parts on aircraft (mainly external parts), other high hardness components with high strength and strong corrosion resistance; a variety of precision molds are required.
For Example: Aerospace industry, military industry, electronics etc.
▍ Product Features
1. Aluminum alloy with zinc as the main alloying element
2. Can be strengthened by heat treatment
3. High hardness, high strength, good wear resistance, belongs to super hard aluminum alloy.
7075 aluminum plate is stress-relieved, after processing will not deformation, warping. All super thick 7075 aluminum plates are ultrasonic detected, which can ensure that there is no sand hole and impurities
▍ Technical Parameters
| Item | Aluminum Sheet/Plate |
| Standard | GB/T3190-2008,GB/T3880-2006,ASTM B209,JIS H4000-2006 etc |
| Grade | 7075 |
| Temper | T3-T8/T351-T851 |
| Tolerance | ±1% |
| Surface Treatment | Mirrored, Brushed |
| Processing Service | Bending，Punching，Cutting etc |
| Edge | Mill edge, Cut edge |
| Thickness | 0.1-200mm |
| Width | 10-2200mm |
| Customized | Yes |
| Certificate | ISO9001 |
| Package | Standard Seaworthy Wooden Pallet Packing |
| MOQ | 6 Ton |
| Sample | Available |
| Delivery Time | 7-15 Working Days |
▍ Chemical Performance
| Grade | Temper | Thickness (mm) | Tensile Strength (R/MPa) | Yield Strength (Rp2.0/MPa) | Elongation | |
| A50mm | A | |||||
| 7075 | O | ＞0.40~0.80 | ≤275 | ≤145 | 10 | - |
| ＞0.80~1.50 | - | |||||
| ＞1.50~3.00 | - | |||||
| ＞3.00~6.00 | - | |||||
| ＞6.00~12.50 | - | |||||
| ＞12.50~75.00 | - | - | 9 | |||
| T6 | ＞0.40~0.80 | 525 | 460 | 6 | ||
| ＞0.80~1.50 | 540 | 460 | 6 | |||
| ＞1.50~3.00 | 540 | 470 | 7 | |||
| ＞3.00~6.00 | 545 | 475 | 8 | |||
| ＞6.00~12.50 | 540 | 460 | 8 | |||
| ＞12.50~25.00 | 540 | 470 | - | 6 | ||
| ＞25.00~50.00 | 530 | 460 | - | 5 | ||
| ＞50.00~60.00 | 525 | 440 | - | 4 | ||
| T76 | ＞1.50~3.00 | 500 | 425 | 7 | - | |
| ＞3.00~6.00 | 500 | 425 | 8 | - | ||
| ＞6.00~12.50 | 490 | 415 | 7 | - | ||
| F | ＞6.00~50.00 | - | ||||
▍ Product Uses
Widely used in many parts on aircraft (mainly external parts), other high hardness components with high strength and strong corrosion resistance; a variety of precision molds are required.
For Example: Aerospace industry, military industry, electronics etc.
