 |
| Quantity: | |
|---|---|
5052
HONESTY-AL
▍ Product Features
Aluminum alloy with Mg as the main alloying element, the magnesium content is between 3-5%. Can also be called aluminum magnesium alloy.
Can not be strengthened by heat treatment
The density is small (5052 density is 2.68), and the weight of aluminum magnesium alloy is lower than that of other series under the same area.
The strength is higher than 1, 3 series, is a high-strength aluminum alloy, fatigue and welding performance is good. High tensile strength, high elongation.
Good corrosion resistance to Marine atmosphere.
It belongs to the hot-rolled aluminum plate series, so it can do anode oxidation deep processing.
▍ Technical Parameters
Item | Aluminum Coil |
Standard | GB/T3190-2008, GB/T3880-2006, ASTM B209, JIS H4000-2006 etc |
Grade | 5052 |
Temper | F, O, H111, H12, H14, H16, H18, H22, H24, H26, H28, H32, H34, H36, H38 |
Surface Treatment | Mill finish, Mirrored, Brushed |
Technology | Hot rolled ( DC ), cold rolling ( CC ) |
Thickness | 0.15-2.0mm |
Width | 10-2000mm |
Tolerance | ±1% |
Application | Auto parts, sheet metal parts; mechanical parts, automobiles, fuel tanks materials, etc |
▍ Product Uses
Various auto parts, sheet metal parts; Mechanical parts, automotive, aircraft fuel tanks, warships, submarines; containers etc.
5052: Marine and transportation material, railway carriages inner and outer cabinet, oil and chemical industry storage device, equipment and medical device panel etc.
▍ Chemical Performance
Grade | Temper | Thickness (mm) | Tensile Strength (Rm/Mpa) | Yield Strength (Rp0.2/Mpa) | Elongation(%) | |
A50mm | A | |||||
5052 | O H111 | >0.20~0.50 | 170-215 | 65 | 12 | - |
>0.50~1.50 | 14 | - | ||||
>1.50~3.00 | 16 | - | ||||
>3.00~6.00 | 18 | - | ||||
>6.00~12.50 | 165-215 | 19 | - | |||
>12.50~80.00 | - | 18 | ||||
H22 H32 | >0.20~0.50 | 210-260 | 130 | 5 | - | |
>0.50~1.50 | 6 | - | ||||
>1.50~3.00 | 7 | - | ||||
>3.00~6.00 | 10 | - | ||||
H24 H34 | >0.20~0.50 | 230-280 | 150 | 4 | - | |
>0.50~1.50 | 5 | - | ||||
>1.50~3.00 | 6 | - | ||||
>3.00~6.00 | 7 | - | ||||
H28 H38 | >0.20~0.50 | 270 | 210 | 3 | - | |
>0.50~1.50 | 3 | - | ||||
>1.50~3.00 | 4 | - | ||||
H112 | >6.00~12.50 | 190 | 80 | 7 | - | |
>12.50~40.00 | 170 | 70 | - | 10 | ||
>40.00~80.00 | 170 | 70 | - | 14 | ||
▍ Product Features
Aluminum alloy with Mg as the main alloying element, the magnesium content is between 3-5%. Can also be called aluminum magnesium alloy.
Can not be strengthened by heat treatment
The density is small (5052 density is 2.68), and the weight of aluminum magnesium alloy is lower than that of other series under the same area.
The strength is higher than 1, 3 series, is a high-strength aluminum alloy, fatigue and welding performance is good. High tensile strength, high elongation.
Good corrosion resistance to Marine atmosphere.
It belongs to the hot-rolled aluminum plate series, so it can do anode oxidation deep processing.
▍ Technical Parameters
Item | Aluminum Coil |
Standard | GB/T3190-2008, GB/T3880-2006, ASTM B209, JIS H4000-2006 etc |
Grade | 5052 |
Temper | F, O, H111, H12, H14, H16, H18, H22, H24, H26, H28, H32, H34, H36, H38 |
Surface Treatment | Mill finish, Mirrored, Brushed |
Technology | Hot rolled ( DC ), cold rolling ( CC ) |
Thickness | 0.15-2.0mm |
Width | 10-2000mm |
Tolerance | ±1% |
Application | Auto parts, sheet metal parts; mechanical parts, automobiles, fuel tanks materials, etc |
▍ Product Uses
Various auto parts, sheet metal parts; Mechanical parts, automotive, aircraft fuel tanks, warships, submarines; containers etc.
5052: Marine and transportation material, railway carriages inner and outer cabinet, oil and chemical industry storage device, equipment and medical device panel etc.
▍ Chemical Performance
Grade | Temper | Thickness (mm) | Tensile Strength (Rm/Mpa) | Yield Strength (Rp0.2/Mpa) | Elongation(%) | |
A50mm | A | |||||
5052 | O H111 | >0.20~0.50 | 170-215 | 65 | 12 | - |
>0.50~1.50 | 14 | - | ||||
>1.50~3.00 | 16 | - | ||||
>3.00~6.00 | 18 | - | ||||
>6.00~12.50 | 165-215 | 19 | - | |||
>12.50~80.00 | - | 18 | ||||
H22 H32 | >0.20~0.50 | 210-260 | 130 | 5 | - | |
>0.50~1.50 | 6 | - | ||||
>1.50~3.00 | 7 | - | ||||
>3.00~6.00 | 10 | - | ||||
H24 H34 | >0.20~0.50 | 230-280 | 150 | 4 | - | |
>0.50~1.50 | 5 | - | ||||
>1.50~3.00 | 6 | - | ||||
>3.00~6.00 | 7 | - | ||||
H28 H38 | >0.20~0.50 | 270 | 210 | 3 | - | |
>0.50~1.50 | 3 | - | ||||
>1.50~3.00 | 4 | - | ||||
H112 | >6.00~12.50 | 190 | 80 | 7 | - | |
>12.50~40.00 | 170 | 70 | - | 10 | ||
>40.00~80.00 | 170 | 70 | - | 14 | ||
