 |
| Quantity: | |
|---|---|
6 series
HONESTY-AL
▍ Product Advantage
Aluminum alloy with magnesium and silicon as the main alloying elements
Heat treatment for strengthening (T4, T6)
Moderate intensity
High corrosion resistance
Good welding performance
Good formability and manufacturability
▍ Product Uses
Mainly used in construction, ships, rail vehicles, electronics, electrical electronics, durable consumer goods and other fields.
Mechanical parts with high strength, weldability and corrosion resistance are required. All kinds of tubes and rods, profiles and decorative components, heat sinks, etc.
6061: Commonly used in aerospace, automotive, marine, construction, etc., known for its excellent strength and corrosion resistance.
6063: Commonly used in the construction and decoration industry, known for its good weldability and surface treatment performance.
6082: Commonly used in aerospace, automotive, machinery, etc., known for its high strength and corrosion resistance.
6005: Commonly used in the construction, electronics, machinery, etc., known for its good processability and weldability.
6013: Commonly used in automotive body panels, doors, etc., known for its good strength and formability.
These 6-series aluminum alloy grades have specific advantages and suitability for different industries and applications. The choice of a specific grade depends on the specific requirements and application needs.
▍ Technical Parameters
Item | Aluminum Sheet / Plate |
Standard | GB/T3190-2008, GB/T3880-2006, ASTM B209, JIS H4000-2006 etc |
Grade | 6061, 6063, 6082 etc. |
Temper | T3, T4, T6, T651 etc. |
Tolerance | ±1% |
Surface Treatment | Mirrored, Brushed, Anodizing etc. |
Processing Service | Cutting, Decoil etc |
Edge | Mill edge, Cut edge |
Thickness | 10-200mm |
Width | 10-2200mm |
▍ Chemical Performance
| Grade | Temper | Thickness (mm) | Tensile Strength (Rm/Mpa) | Yield Strength (Rp0.2/MPa) | Elongation(%) | |
| A50mm | A | |||||
| 6061 | O | 0.40~1.50 | ≤150 | ≤85 | 14 | - |
| ＞1.50~3.00 | 16 | - | ||||
| ＞3.00~6.00 | 19 | - | ||||
| ＞6.00~12.50 | 16 | - | ||||
| ＞12.50~25.00 | - | 16 | ||||
| T4 | 0.40~1.50 | 12 | - | |||
| ＞1.50~3.00 | 14 | - | ||||
| ＞3.00~6.00 | 16 | - | ||||
| ＞6.00~12.50 | 18 | - | ||||
| ＞12.50~40.00 | - | 15 | ||||
| ＞40.00~80.00 | - | 14 | ||||
| T6 | 0.40~1.50 | 290 | 240 | 6 | - | |
| ＞1.50~3.00 | 7 | - | ||||
| ＞3.00~6.00 | 10 | - | ||||
| ＞6.00~12.50 | 9 | - | ||||
| ＞12.50~40.00 | - | 8 | ||||
| ＞40.00~80.00 | - | 6 | ||||
| ＞80.00~100.00 | - | 5 | ||||
| F | ＞2.50~150.00 | - | ||||
| Grade | Temper | Thickness (mm) | Tensile Strength (Rm/Mpa) | Yield Strength (Rp0.2/MPa) | Elongation(%) | |
| A50mm | A | |||||
| 6063 | O | 0.50~5.00 | ≤130 | - | 20 | - |
| ＞5.00~12.50 | 15 | - | ||||
| ＞12.50~20.00 | - | 15 | ||||
| T4 | 0.50~5.00 | 150 | - | 10 | - | |
| ＞5.00~10.00 | 130 | 10 | - | |||
| T6 | 0.50~5.00 | 240 | 190 | 8 | - | |
| ＞5.00~10.00 | 230 | 180 | 8 | - | ||
| Grade | Temper | Thickness (mm) | Tensile Strength (Rm/Mpa) | Yield Strength (Rp0.2/MPa) | Elongation(%) | |
| A50mm | A | |||||
| 6082 | O | 0.40~1.50 | ≤150 | ≤85 | 14 | - |
| ＞1.50~3.00 | 16 | - | ||||
| ＞3.00~6.00 | 18 | - | ||||
| ＞6.00~12.50 | 17 | - | ||||
| ＞12.50~25.00 | ≤155 | - | - | 16 | ||
| T4 | 0.40~1.50 | 205 | 110 | 12 | - | |
| ＞1.50~3.00 | 14 | - | ||||
| ＞3.00~6.00 | 15 | - | ||||
| ＞6.00~12.50 | 14 | - | ||||
| ＞12.50~40.00 | - | 13 | ||||
| ＞40.00~80.00 | - | 12 | ||||
| T6 | 0.40~1.50 | 310 | 260 | 6 | - | |
| ＞1.50~3.00 | 7 | - | ||||
| ＞3.00~6.00 | 10 | - | ||||
| ＞6.00~12.50 | 300 | 255 | 9 | - | ||
| F | ＞4.50~150.00 | - | ||||
▍ Product Advantage
Aluminum alloy with magnesium and silicon as the main alloying elements
Heat treatment for strengthening (T4, T6)
Moderate intensity
High corrosion resistance
Good welding performance
Good formability and manufacturability
▍ Product Uses
Mainly used in construction, ships, rail vehicles, electronics, electrical electronics, durable consumer goods and other fields.
Mechanical parts with high strength, weldability and corrosion resistance are required. All kinds of tubes and rods, profiles and decorative components, heat sinks, etc.
6061: Commonly used in aerospace, automotive, marine, construction, etc., known for its excellent strength and corrosion resistance.
6063: Commonly used in the construction and decoration industry, known for its good weldability and surface treatment performance.
6082: Commonly used in aerospace, automotive, machinery, etc., known for its high strength and corrosion resistance.
6005: Commonly used in the construction, electronics, machinery, etc., known for its good processability and weldability.
6013: Commonly used in automotive body panels, doors, etc., known for its good strength and formability.
These 6-series aluminum alloy grades have specific advantages and suitability for different industries and applications. The choice of a specific grade depends on the specific requirements and application needs.
▍ Technical Parameters
Item | Aluminum Sheet / Plate |
Standard | GB/T3190-2008, GB/T3880-2006, ASTM B209, JIS H4000-2006 etc |
Grade | 6061, 6063, 6082 etc. |
Temper | T3, T4, T6, T651 etc. |
Tolerance | ±1% |
Surface Treatment | Mirrored, Brushed, Anodizing etc. |
Processing Service | Cutting, Decoil etc |
Edge | Mill edge, Cut edge |
Thickness | 10-200mm |
Width | 10-2200mm |
▍ Chemical Performance
| Grade | Temper | Thickness (mm) | Tensile Strength (Rm/Mpa) | Yield Strength (Rp0.2/MPa) | Elongation(%) | |
| A50mm | A | |||||
| 6061 | O | 0.40~1.50 | ≤150 | ≤85 | 14 | - |
| ＞1.50~3.00 | 16 | - | ||||
| ＞3.00~6.00 | 19 | - | ||||
| ＞6.00~12.50 | 16 | - | ||||
| ＞12.50~25.00 | - | 16 | ||||
| T4 | 0.40~1.50 | 12 | - | |||
| ＞1.50~3.00 | 14 | - | ||||
| ＞3.00~6.00 | 16 | - | ||||
| ＞6.00~12.50 | 18 | - | ||||
| ＞12.50~40.00 | - | 15 | ||||
| ＞40.00~80.00 | - | 14 | ||||
| T6 | 0.40~1.50 | 290 | 240 | 6 | - | |
| ＞1.50~3.00 | 7 | - | ||||
| ＞3.00~6.00 | 10 | - | ||||
| ＞6.00~12.50 | 9 | - | ||||
| ＞12.50~40.00 | - | 8 | ||||
| ＞40.00~80.00 | - | 6 | ||||
| ＞80.00~100.00 | - | 5 | ||||
| F | ＞2.50~150.00 | - | ||||
| Grade | Temper | Thickness (mm) | Tensile Strength (Rm/Mpa) | Yield Strength (Rp0.2/MPa) | Elongation(%) | |
| A50mm | A | |||||
| 6063 | O | 0.50~5.00 | ≤130 | - | 20 | - |
| ＞5.00~12.50 | 15 | - | ||||
| ＞12.50~20.00 | - | 15 | ||||
| T4 | 0.50~5.00 | 150 | - | 10 | - | |
| ＞5.00~10.00 | 130 | 10 | - | |||
| T6 | 0.50~5.00 | 240 | 190 | 8 | - | |
| ＞5.00~10.00 | 230 | 180 | 8 | - | ||
| Grade | Temper | Thickness (mm) | Tensile Strength (Rm/Mpa) | Yield Strength (Rp0.2/MPa) | Elongation(%) | |
| A50mm | A | |||||
| 6082 | O | 0.40~1.50 | ≤150 | ≤85 | 14 | - |
| ＞1.50~3.00 | 16 | - | ||||
| ＞3.00~6.00 | 18 | - | ||||
| ＞6.00~12.50 | 17 | - | ||||
| ＞12.50~25.00 | ≤155 | - | - | 16 | ||
| T4 | 0.40~1.50 | 205 | 110 | 12 | - | |
| ＞1.50~3.00 | 14 | - | ||||
| ＞3.00~6.00 | 15 | - | ||||
| ＞6.00~12.50 | 14 | - | ||||
| ＞12.50~40.00 | - | 13 | ||||
| ＞40.00~80.00 | - | 12 | ||||
| T6 | 0.40~1.50 | 310 | 260 | 6 | - | |
| ＞1.50~3.00 | 7 | - | ||||
| ＞3.00~6.00 | 10 | - | ||||
| ＞6.00~12.50 | 300 | 255 | 9 | - | ||
| F | ＞4.50~150.00 | - | ||||
